This is the one you have been waitng for

McGary Audio power amplifiers exude quality using only the finest electrical components selected for their sound, quality and reliability. Components such as German made Mundorf oil-filled capacitors, American made custom transformers and Teflon coated silver plated copper wire in conjunction with Cardas silver solder were all carefully selected, and then hand assembled by Mike McGary in Gainesville Virginia. All electronic components are rated above their intended usage, installed within the beautiful and rugged American made thick steel enclosure that is powder coated throughout to resist corrosion, and each amplifier is thoroughly tested to ensure the audio consumer will enjoy it for a lifetime…AND BACKED BY A LIFETIME WARRANTY!

Part-Time Audiophile review of the SA-1


  • 30 Watts Per Channel (RMS) Low Distortion, 40 Watts Per Channel (RMS) Waveform Clipping (8 Ohm Load)
  • 20Hz – 20kHz bandwidth
  • Signal-to-noise ratio: greater than 85 dB unweighted/unfiltered & referenced to full rated output power at 1kHz
  • 4, 8, and 16 ohm output taps utilizing gold plated binding posts
  • Gold plated RCA input connectors
  • American made 13-Gauge steel enclosure…powder coated throughout (mint green metallic base with satin black top plate)
  • Ceramic tube sockets (attached directly to the chassis)
  • Point-to-point handwired with 16-gauge Teflon insulated silver plated copper wire, and using Cardas silver solder for all electrical connections with star grounding employed
  • Detachable IEC Pangea power cord provided
  • Tube complement: (2) NOS General Electric input (6BQ7A) and (2) driver (6SN7GTB) vacuum tubes, (4) new Russian KT77 matched Gold Lion output vacuum tubes
  • Self-bias output tubes require no bias adjustments, and configured for Ultralinear operation
  • Dimensions: D= 13”, W= 17” and H= 8.5”
  • Weight; 46 lbs
  • Power: 120V-60 Hz/240V-50Hz (electrically configurable, please inquire if purchasing product for use outside the USA)
  • Electrical Engineer Designed and Handmade in Gainesville Virginia with a (transferrable) Lifetime Warranty (excluding the vacuum tubes which come with a 90 day warranty from date of purchase)

 Color options for the SA 1 amplifier enclosure, top cover plate and the transformers can be customized for an additional cost…please inquire.

Dr Vinyl has the SA-1 for your personal audition.

Close Menu